Modeling
About Archicad's design tools, element connections, modeling concepts, etc.

strange cuts going through wall ?

Anonymous
Not applicable
i have an internal wall inside my house.
about 3 meters a´way there is a complex profile beam (gutter)
the gutter does not go any where near this internal wall.
But what ever i do, there is the profile cut of my gutter cutting straight through the wall ?
any ideas how to remove this little problem.

thanks.
Ian
5 REPLIES 5
Anonymous
Not applicable
i have an internal wall inside my house.
about 3 meters a´way there is a complex profile beam (gutter)
the gutter does not go any where near this internal wall.
But what ever i do, there is the profile cut of my gutter cutting straight through the wall ?
any ideas how to remove this little problem.

thanks.
Ian
Barry Kelly
Moderator
If the wall and the gutter aren't touching then they shouldn't interact with each other.
Turn all your layers on and see if there is another gutter lurking about.
Barry.
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11
Anonymous
Not applicable
Hi Barry.
your right, i turned on all the layers and then found 2 pieces of gutter walking through my walls.
funny enough in 3d, it never showed the gutters going near the walls but on plan, the end point of the gutter was to long and strectjing through the wall.

thanks barry for the help.
Ian
Anonymous
Not applicable
weird, i have just spotted that a few new posts on the forum have been double posted. multiplied ??

just seems to have been a kickup with the server maybe ?
Ian
vfrontiers
Enthusiast
It must be your profile... Is it drawn as a BEAM... beam to wall cuts are brutal... Make sure gutter is on separate layer with different PRIORITY number....
Duane

Visual Frontiers

AC25 :|: AC26 :|: AC27
:|: Enscape3.4:|:TwinMotion

DellXPS 4.7ghz i7:|: 8gb GPU 1070ti / Alienware M18 Laptop