Documentation
About Archicad's documenting tools, views, model filtering, layouts, publishing, etc.

AC 10 - Objects/Elements w/ 25%,50%&75% Fills Plot SOLID

matthewjj
Newcomer
Our office is experiencing disturbing behavior when Plotting from AC 10. It seems that all objects and elements that utilize any of the standard 25%, 50% or 75% fills are PLOTTING Solid. They will PRINT okay, but the quality is much reduced and unacceptable.

We cannot be the only office experiencing this. We are using an OCE TDS 600.

This is an office of over 60 architects. We cannot deploy AC 10 until this is resolved!!!

WHAT HAPPENED GRAPHISOFT?
matt johnson
archicad since 2004
imac 27, 4.2 GHz Intel i7, 16 GB RAM, radeon 575 4 GB, macOS 10.14.6
imac, 4.0ghz i7, 16gb ram, Radeon M9 390 2GB, OS X El Capitan
1 REPLY 1
Scott Bulmer
Booster
You're not. Please see:

http://archicad-talk.graphisoft.com/viewtopic.php?t=11075&postdays=0&postorder=desc&&start=10
AC27 v. 4060 w/ MEP, Cadimage, Twinmotion 2023.2.2 using AC from AC6.0, 2021 MacPro M1 chip, Adobe CC. Used AC on both platforms.