Document & Visualize forum
cancel
Showing results for 
Search instead for 
Did you mean: 

Beam overhead lines above ceiling

jenkashevchenko
Participant

hello, everybody.

 

I have such situation on the floor plan: 1.Floor(slab) - 2.cut plane above 1.Floor - 3.tilted beam above 2.cut plane - 4.ceiling(slab) above part of 3.tilted beam - and another part of 3.tilted beam above 4.ceiling. There is an overhead line of  full beam on the floor plan, but should be only part(under ceiling). What should I do to hide part of the beam above 4.ceiling(slab)?

jenkashevchenko_0-1634973506054.png

jenkashevchenko_1-1634973578395.pngjenkashevchenko_2-1634973619546.png

 

 

AC24

 

thanks

3 REPLIES 3

Laszlo Nagy
Community Admin
Community Admin

It would be best if you posted a few screenshots so we can see what the exact situation is.

....................................................................................................
Laszlo Nagy, Lead Moderator, Community Admin
Get Archicad Tips at https://twitter.com/laszlonagy
AMD Ryzen 1700X CPU, 48 GB RAM, NVidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), WIN10 PRO ENG, AC20-AC25
Loving Archicad since 1995

I've posted few pictures, hope it will help to understand the problem. Pic.1 - section, Pic.2 - floor plan, Pic.3 - floor plan that should be.

Laszlo Nagy
Community Admin
Community Admin

Try these settings for the Beam as shown in the screenshot:

1. "Floor Plan Display" field to "Projected with Overhead".

2. "Projection Mode" to "Hybrid", and "Overhead" to "Projected".

3. "Show Projection" to "To Floor Plan Range".

OverheadBeamToFloorPlanRange.png

....................................................................................................
Laszlo Nagy, Lead Moderator, Community Admin
Get Archicad Tips at https://twitter.com/laszlonagy
AMD Ryzen 1700X CPU, 48 GB RAM, NVidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), WIN10 PRO ENG, AC20-AC25
Loving Archicad since 1995

Start a new conversation!

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!