Documentation
About Archicad's documenting tools, views, model filtering, layouts, publishing, etc.
SOLVED!

Complex profiles display in floor plan

Anonymous
Not applicable
Hi. I have problem with display complex profiles in floor plan.

For example: I draw one complex profile beam/strip foundation (e.g. Precast Inverted Tee), but in floor plan that beam is displayed with three lines, nevertheless what Floor Plan and Show Projection combination I choose.

Under the complex beam is "dumb" inverted tee created from two beams and it is displayed correctly.

Does someone have solution for that problem?
1 ACCEPTED SOLUTION

Accepted Solutions
Solution
Lingwisyer
Guru
If you use a wall instead, your profile will show. The current beam tool does not use a projection of the profile and instead just draws an outline with a toggled centre line hence what you have seen.



Ling.

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win10 | R5 2600 | 16GB | GTX1660 

View solution in original post

2 REPLIES 2
Solution
Lingwisyer
Guru
If you use a wall instead, your profile will show. The current beam tool does not use a projection of the profile and instead just draws an outline with a toggled centre line hence what you have seen.



Ling.

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win10 | R5 2600 | 16GB | GTX1660 
Anonymous
Not applicable
Solved. Thank you!