Documentation
About Archicad's documenting tools, views, model filtering, layouts, publishing, etc.

Creating two door leaves with one frame (inside and outside, kinda like hotel connecting door)

Anonymous
Not applicable
Hi, I have a project that needed to draw a door with additional insect screen door.
Is there any way to create that using door tool?

What i have done is create 2 doors, 1 normal door with frame
and the other is door leaf only (by putting frame width and depth value to 0)


this is what it looks like

but the problem if i try to put 0 value to the frame width, the door will have a blue line on 2d symbol which is printable
and i couldn't find which option to turn it off



^
blue line on the leaf only door that i wish to remove

Would be appreciated for the help

Thank you
1 REPLY 1
Barry Kelly
Moderator
I don't use these door objects but having a quick look I think this will work.
Set a 'double rebate' to the frame and adjust the sizes so it is symmetrical to the frame thickness.
Then place 2 complete doors with frames.

Barry.
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11