cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Document & Visualize forum

Display Order in Section/Elevation views - No value check / Value defaults itself

Hi AC Software Testers and QA Engineers,

 

I was adjusting Display Order in Section views (Teamwork and regular files), but another time I open file, elements that had Display Order adjusted defaults to original Display Order level. I was trying to figure out what is happening but it looks like information about Display Order in "Element Information" showing wrong "Display order level" value no matter to what level I put elements in section/elevation views.

 

In the example below I chosen "Send to Back" and "Display Order Level" value still remains "6". 

AlgimantasKuprenas_0-1667544137770.png

 

GRAPHISOFT BIM Manager Training Week attendee
ArchiCAD v9 - v26 INT / NOR (4019)
i5-12600K @ 5.0Ghz, 32GB ram, Intel UHD 770
NVMe SSD - Read - 3 GB/s, Write - 2GB/s, Windows 11
ArchiCAD Discord channel: https://discord.gg/VcXcNChkKe

1 REPLY 1

Barry Kelly
Moderator

It works slightly differently in elevation to what it does in plan.

In plan send to back will move a line to level 1.

In elevation it will go to level 6.

But press it again it will go to 5 then 4 then 3, etc.

 

Don't ask me why.

 

Barry.

 


One of the forum moderators.
Versions 6.5 to 25
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision 3510 - i7 6820HQ @ 2.70GHz, 16GB RAM, AMD FirePro W5130M, Windows 10

Start a new conversation!

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!