Editing Materials such as Pine wood

Anonymous · ‎2008-03-25

How do I stop the grain in pine or any other wood with a heavy grain pattern from running into the next board? This picture is actually 4 boards stacked.

Dwight · ‎2008-03-25

Each board needs its material origin adjusted, otherwise obvious patterns all radiate from the same origin...

Us the Align 3D texture tool to do this.

Dwight Atkinson

Anonymous · ‎2008-03-25

I've found the align 3D Texture, and I see that I must be in 3D mode to get them to highlight, but, not sure how to operate tool.......

Dwight · ‎2008-03-25

The idea is that once an element - slab roof wall is selected in 3D, you then either Set Origin or Set Direction for it by picking the command in the menu, then clicking on a node of the element to relocate the texture map to begin from that point. In the case of direction, you draw a vector.

Play.

Dwight Atkinson

Stress Co_ · ‎2008-03-26

CP wrote:
I've found the align 3D Texture, and I see that I must be in 3D mode to get them to highlight, but, not sure how to operate tool.......

Off topic... but I WISH we could align in elevation views.

Marc Corney, Architect
Red Canoe Architecture, P. A.

Mac OS 10.15.7 (Catalina) //// Mac OS 14.2.1 (Sonoma)
Processor: 3.6 GHz 8-Core Intel Core i9 //// Apple M2 Max
Memory: 48 GB 2667 MHz DDR4 //// 32 GB
Graphics: Radeon Pro 580X 8GB //// 12C CPU, 30C GPU
ArchiCAD 25 (5010 USA Full) //// ArchiCAD 27 (4030 USA Full)

Find the next step in your career as a Graphisoft Certified BIM Coordinator!

Editing Materials such as Pine wood

Didn't find the answer?

Check other topics in this Forum

Read the latest accepted solutions!

Start a new conversation!