Documentation
About Archicad's documenting tools, views, model filtering, layouts, publishing, etc.

Fill Area

Llian
Advocate
My calculation preferences is showing as having 2 decimal…but the fill area here is showing a round-up number 7 m2 when it should be 6.75 m2. How do I set to fill area to show the exact area 6.75 m2?

Screen Shot 2017-07-14 at 1.28.21 AM.png
Lilian Seow
LEED AP | cSBA
Interior-Architecture and BIM Management
AC20 USA | 27- macOS 10.14.6| 4 GHz Intel Core i7| 32 GB RAM | Archicad-user since 1994!
4 REPLIES 4
runxel
Legend
Lengths and areas can be set different.
You'll find it at the project preferences >dimension settings.
When done, save it.

(Sorry for german screenshot – but I'm sure you'll figure it out 😉
dimset.png
Lucas Becker | AC 27 on Mac | Author of Runxel's Archicad Wiki | Editor at SelfGDL | Developer of the GDL plugin for Sublime Text |
«Furthermore, I consider that Carth... yearly releases must be destroyed»
Barry Kelly
Moderator
That is actually a 'Dimensions' setting and not a calculation setting.

Barry.
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11
Barry Kelly
Moderator
SNAP!
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11
Llian
Advocate
THANS…yes I found it!
Lilian Seow
LEED AP | cSBA
Interior-Architecture and BIM Management
AC20 USA | 27- macOS 10.14.6| 4 GHz Intel Core i7| 32 GB RAM | Archicad-user since 1994!