Documentation
About Archicad's documenting tools, views, model filtering, layouts, publishing, etc.
SOLVED!

I need to get the two slabs joined together. How can I deal with it?

LeeJaeYoung
Virtuoso

 

LeeJaeYoung_2-1657552946635.png

 

This is a cross section.
And there is a down in the toilet part, so you have to combine the two slabs.
How can I deal with it?

 

I'm curious how to model where the slab down happens.

AC27 on window 11
1 ACCEPTED SOLUTION

Accepted Solutions
Solution
Lingwisyer
Guru

In your second image, you have two Composite slabs butting each other. In the first, I am unsure what you have done...? You have just used Subtraction?

 

Lingwisyer_0-1657785470553.png

 

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win10 | R5 2600 | 16GB | GTX1660 

View solution in original post

10 REPLIES 10

Hi @LeeJaeYoung, you can adjust the slab edge angle in 3D view, get the the right angle by angular dimension tool from section view ( if not defined ).

AC 27 INT 5003 - AC 26 INT 6019 ( For MEP Purposes )
AMD Ryzen 7 5800H with Radeon Graphics 3.20 GHz 16.0 GB

LeeJaeYoung_0-1657590249279.png

That's all I can think of.^^

AC27 on window 11

It can be done this way.

AC 27 INT 5003 - AC 26 INT 6019 ( For MEP Purposes )
AMD Ryzen 7 5800H with Radeon Graphics 3.20 GHz 16.0 GB

Is there any other way?

AC27 on window 11
Lingwisyer
Guru

SEO your two slabs.

 

Lingwisyer_0-1657770325668.png

Lingwisyer_1-1657770397073.png

 

 

 

Ling.

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win10 | R5 2600 | 16GB | GTX1660 

This method doesn't work when I test it.

 

LeeJaeYoung_0-1657783597344.png

 

LeeJaeYoung_0-1657783475795.png

 

AC27 on window 11
Solution
Lingwisyer
Guru

In your second image, you have two Composite slabs butting each other. In the first, I am unsure what you have done...? You have just used Subtraction?

 

Lingwisyer_0-1657785470553.png

 

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win10 | R5 2600 | 16GB | GTX1660 

thank you 

It wasn't addition, it was subtraction...
But in this case, how do you handle the floor plan?
Isn't it better not to show the lower part?

 

turn off the layer
Are you changing to hidden linetype?


LeeJaeYoung_0-1657797488716.png

LeeJaeYoung_1-1657797545027.png

 

AC27 on window 11
Lingwisyer
Guru

You could use Cover Fills to hide what is below.

 

I feel like there was some improvement with this interaction in AC25, but I do not recall, nor am I using it... Anyway, I do not usually model like this. These thicker sections of slabs are usually structural beams or footings, so I do them as separate Beams on their own layers.

 

 

Ling.

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win10 | R5 2600 | 16GB | GTX1660