Project data & BIM
About BIM-based management of attributes, schedules, templates, favorites, hotlinks, projects in general, quality assurance, etc.
SOLVED!

Is there any way to change the To and From positions of the zone?

LeeJaeYoung
Virtuoso

 

LeeJaeYoung_3-1658333919372.png

1. Only 침실3 (room 3) appears in the from zone, right?

 

LeeJaeYoung_1-1658333481329.png

 

2. Is there any way to change the To and From positions of the zone?

AC27 on window 11
3 ACCEPTED SOLUTIONS

Accepted Solutions
Solution
Ady84a
Booster

- You will need to create a custom property for ddoors /Windows with expression "if" statement. For example "if" the room name is "foo" then you get "To" else you get "From"

- instead of name of room as a condition you can create a second custom property as True or False. when the value is True, the custom property  "To" and "From" that you create will be flipped.

View solution in original post

Solution

there is also another way to do that with pictures. have a look at this post 

https://community.Graphisoft.com/t5/Document-articles/Scheduling-Doors-by-Zone/ta-p/303883 

View solution in original post

Solution

means the door didn't recognize the Zone. 

check that the Zone is Automatic and reload it. If it is manual then the edges of the Zone must include the door. 

ZoneAutomatic.png

View solution in original post

8 REPLIES 8
Solution
Ady84a
Booster

- You will need to create a custom property for ddoors /Windows with expression "if" statement. For example "if" the room name is "foo" then you get "To" else you get "From"

- instead of name of room as a condition you can create a second custom property as True or False. when the value is True, the custom property  "To" and "From" that you create will be flipped.

Can you show me an image?
I speak short English. ^^

AC27 on window 11
Solution

there is also another way to do that with pictures. have a look at this post 

https://community.Graphisoft.com/t5/Document-articles/Scheduling-Doors-by-Zone/ta-p/303883 

thank you ^^

This is what I was looking for. ^^

AC27 on window 11

LeeJaeYoung_1-1658340224851.pngLeeJaeYoung_2-1658340243279.png

May I ask about this here too?
What should I do if the entrance does not appear in both?

Yellow color is zone

 

AC27 on window 11
Solution

means the door didn't recognize the Zone. 

check that the Zone is Automatic and reload it. If it is manual then the edges of the Zone must include the door. 

ZoneAutomatic.png

Thank you so much

I think I need to study this part more.
The wall is made in the shape of our country.
The connection between the wall with the door and the zone seems to be a problem because it seems to be up to the reference line.
Guess I'll have to re-model it... ^^
Thank you for your interest.

AC27 on window 11

LeeJaeYoung_0-1658366722635.png

LeeJaeYoung_1-1658366759265.pngLeeJaeYoung_2-1658366786060.png

 

LeeJaeYoung_3-1658366910794.pngLeeJaeYoung_4-1658366931392.png

A door will only come out if the zone area contains a wall.
End of test ^^

 

AC27 on window 11