Documentation
About Archicad's documenting tools, views, model filtering, layouts, publishing, etc.
SOLVED!

It's easy to assign Edit length of Witness Line to Two or more dimensions together. Is it possible?

LeeJaeYoung
Virtuoso

LeeJaeYoung_0-1667524527484.png

There are two or more dimensions above and below in the section view.

 

LeeJaeYoung_1-1667524609787.png

It's easy to assign Edit length of Witness Line to Two or more dimensions together. Is it possible?

AC27 on window 11
1 ACCEPTED SOLUTION

Accepted Solutions
Solution
Barry Kelly
Moderator

With the pet palette, only one dimension line at a time will be adjusted.

However if you select all of the dimension lines and adjust the value in the info box, they will all change.

Downside is you are not adjusting it visually on plan, you have to know the length you want.

 

BarryKelly_0-1667525496178.png

 

Barry.

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

View solution in original post

2 REPLIES 2
Solution
Barry Kelly
Moderator

With the pet palette, only one dimension line at a time will be adjusted.

However if you select all of the dimension lines and adjust the value in the info box, they will all change.

Downside is you are not adjusting it visually on plan, you have to know the length you want.

 

BarryKelly_0-1667525496178.png

 

Barry.

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

thank you so much. ^^

AC27 on window 11