cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Document & Visualize forum

Material not being overridden in plan

Anonymous
Not applicable
Howdy,

I think I have an issue with my renovation filters. I have marked some walls in red circles in attached image. You can see these walls are showing material markings unlike all the other walls which are filled with solid black. The walls that are showing differently are all "new construction" whereas all else is "existing", which leads me to believe it'll be something in the renovation filter.

I don't think I understand the difference between "cover fills" and "cut fills" to be able to identify where I should be looking.

Any help appreciated.
1 ACCEPTED SOLUTION
3 REPLIES 3

Solution
David Maudlin
Virtuoso
TightKnit:

Check the Renovation Filter you are using and see if New Elements is set to Override. If so, check the New Elements Graphic Override Rules, it could be overriding the Fill Type.

David
David Maudlin / Architect

www.davidmaudlin.com

Digital Architecture

AC26 USA • iMac 27" 4.0GHz Quad-core i7 | 24 gb ram • MacBook Pro 2.8GHz | 16 gb ram • OSX10.15.7

Anonymous
Not applicable
SOLVED

Thanks David! Indeed, it is all in the overrides. The reason all the other walls in "Existing" are black is because they are being overridden. I can do the same override to the walls in "New Construction".

David Maudlin
Virtuoso
TightKnit:

Good to know that worked, thanks for posting back.

David
David Maudlin / Architect

www.davidmaudlin.com

Digital Architecture

AC26 USA • iMac 27" 4.0GHz Quad-core i7 | 24 gb ram • MacBook Pro 2.8GHz | 16 gb ram • OSX10.15.7

Start a new conversation!

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!