Modeling
About Archicad's design tools, element connections, modeling concepts, etc.
SOLVED!

Omitting Beam Segment and Column Segment from Schedule of Elements

Voytek
Booster

Could anyone please advise how to omit Beam Segment and Column Segment from Schedule of Elements in AC25. I just would like to show Beam and Column. Thanks.

AC 5.0 to AC27 INT Full - Windows 10 Pro for Wokstations - Lenovo P70 - 2.8GHz Intel Xeon - ThinkPad Display 720 x 1280
2 ACCEPTED SOLUTIONS

Accepted Solutions
Solution
Barry Kelly
Moderator

In the schedule selection criteria, add a field 'Element type IS beam' or 'Element type IS NOT beam segment'.

Just depends how you want to do it.

The same goes for the column.

 

Barry.

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

View solution in original post

Solution

Thank you Barry for the quick response and another helpful reply.

AC 5.0 to AC27 INT Full - Windows 10 Pro for Wokstations - Lenovo P70 - 2.8GHz Intel Xeon - ThinkPad Display 720 x 1280

View solution in original post

13 REPLIES 13
Solution
Barry Kelly
Moderator

In the schedule selection criteria, add a field 'Element type IS beam' or 'Element type IS NOT beam segment'.

Just depends how you want to do it.

The same goes for the column.

 

Barry.

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11
Solution

Thank you Barry for the quick response and another helpful reply.

AC 5.0 to AC27 INT Full - Windows 10 Pro for Wokstations - Lenovo P70 - 2.8GHz Intel Xeon - ThinkPad Display 720 x 1280

Hello,

When there are simple rectangular beams and Huanch beams (contains 3 segments) designed with segment option,

then it is not possible to list all beams in one single schedule. I have to list Hunch beams separately.

Is there any solution for it?

AMD Ryzen 5 3600 6-Core Processor 3.59 GHz
Ram - 16.0 GB
System - Windows 10 Ultimate, 64 bit

NVEDIA GForce 8400GS

Archicad 9..., 24
Laszlo Nagy
Community Admin
Community Admin

Could you show us a screenshot of how the Scheme Setup Dialog is set up and what is the resulting Schedule?

Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27

Hi Laszlo Nagy,

Here are  screen shots.Haunch beam.JPGProperty manager 2.JPG

AMD Ryzen 5 3600 6-Core Processor 3.59 GHz
Ram - 16.0 GB
System - Windows 10 Ultimate, 64 bit

NVEDIA GForce 8400GS

Archicad 9..., 24
Laszlo Nagy
Community Admin
Community Admin

Change your Criteria so it is:

 

Element Types IS Beam OR

Element Type IS Beam Segment

Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27

Hi Laszlo Nagy,

Here is I am sending screenshot by doing changes as you suggested though I have already tried it before.

Fields marked with arrow are not needed but still they are being listed, thus making quantities double or extra. (Same problem is coming with Coumn schedule too)Haunch beam 1.JPG

 

AMD Ryzen 5 3600 6-Core Processor 3.59 GHz
Ram - 16.0 GB
System - Windows 10 Ultimate, 64 bit

NVEDIA GForce 8400GS

Archicad 9..., 24

That is because in your criteria you have both beam or beam segment.

A beam is a beam and has beam segments - that is why they are listing twice.

 

You want just one in you criteria.

If you want just the entire beam, just use beam.

If you want info on each beam segment, then use beam segment.

 

Barry.

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

Hi Barry Kelly,

Thanks for suggestion but if you see earlier post in this thread, i have done it that too.

This problem occures when simple rectangular beam and segmented beams comes together in a project and we need schedule for simple beam as normal but for segmenetd beam we need listing for individual segment.

AMD Ryzen 5 3600 6-Core Processor 3.59 GHz
Ram - 16.0 GB
System - Windows 10 Ultimate, 64 bit

NVEDIA GForce 8400GS

Archicad 9..., 24