Document & Visualize forum
cancel
Showing results for 
Search instead for 
Did you mean: 

Reveal Edge Different in Section / Elevation / Plan

Anonymous
Not applicable
How Do I fix this:

I have a window in my exterior wall. In plan it looks correct in the wall where I set it. When I look at that window in section, it is offset from the wall and looks odd and unusable dangling in mid air offset from the wall. This also occurs with the 3D perspective. If I play with the reveal distant for the window, it fixes the one view then screws up the other and vice versa.

Not all the windows do this but it is extremely annoying. See picture below. How to I get the plan and section of the window to coordinate its placement in the wall.

https://archicad-talk.graphisoft.com/download/file.php?id=45868

https://archicad-talk.graphisoft.com/download/file.php?id=45867&mode=view
1 REPLY 1

Laszlo Nagy
Community Admin
Community Admin
You should read about the "Opening Reference" within the Profile Manager:

https://helpcenter.graphisoft.com/user-guide/76458/#IX_Opening_Reference

This may be the source of this behavior.
....................................................................................................
Laszlo Nagy, Lead Moderator, Community Admin
Get Archicad Tips at https://twitter.com/laszlonagy
AMD Ryzen 1700X CPU, 48 GB RAM, NVidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), WIN10 PRO ENG, AC20-AC25
Loving Archicad since 1995

Start a new conversation!

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!