cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Document & Visualize forum

Schedule field not showing from one floor level only

jagber
Contributor

jagber_0-1664195189001.png

jagber_1-1664195373588.png

 

I have a schedule for electrical items which used to work until recently. For some reason the cost field isnt coming through for any items on the ground floor but it works on the first floor. I copied some GPO's from the first floor to the ground floor to test it out and this doesnt work. Hoping to get some advice on how to resolve this.

1 ACCEPTED SOLUTION

Solution
Andrii Levko
Expert

It's hard to say without seeing all setting of schedule. It may be some item on Ground floor has wrong classification or other criteria and value in this field is not shown, because probably "Marge items" is marked.

 

For the beginning, I would unmark "Marge items" and see what exactly the problem is with.

Andrii
AC 8.1 - 25 INT/POL 5010

View solution in original post

6 REPLIES 6

Solution
Andrii Levko
Expert

It's hard to say without seeing all setting of schedule. It may be some item on Ground floor has wrong classification or other criteria and value in this field is not shown, because probably "Marge items" is marked.

 

For the beginning, I would unmark "Marge items" and see what exactly the problem is with.

Andrii
AC 8.1 - 25 INT/POL 5010


@Andrii Levko wrote:

It's hard to say without seeing all setting of schedule. It may be some item on Ground floor has wrong classification or other criteria and value in this field is not shown, because probably "Marge items" is marked.

 

For the beginning, I would unmark "Marge items" and see what exactly the problem is with.


Thanks, I'll check out the merge. 

 

I copied the object from the first floor to the ground to test it out and it doesn't appear in the table. The properties are all identical.

 

If that doesn't work what can I send across to make it easier to find the problem?

It looks like one of the items is hidden + locked. I tried showing all layers but I cant seem to resolve this.

jagber_0-1664398306097.png

 

Exactly, and because of this one item, the value in the field may not be displayed when you have selected "merge items" .
This items is locked in the schedule because it was on a hidden layer when opening the schedule.

The easiest way to find it is to show all layers on the plan and then open the schedule.

Andrii
AC 8.1 - 25 INT/POL 5010

Thanks for the help. I managed to figure it out before seeing this. I had to do this and I think unlock everything too. 

Mahmoud Qenawi
Advisor

C6EFAB6A-DE71-4EEF-976B-300956DB7284.png

 Hi @jagber, I see you already got some cost property from ground floor items so you can first select this item in floor plan or 3D and check it’s properties.

Start a new conversation!

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!