BIMx
About BIMx (mobile, web and desktop), connection to BIMcloud, and related technical questions.

What is the tallest a step can be and still get up in Bimx viewer?

4hotshoes
Advisor
Sometimes you can get stuck and can't move on if a step is too tall. Is there a way to make this work? what are step height limitations?
Todd Oeftger
AC27 Mac MacBook Pro 15", 2019, 2.3 GHz i9, 32GB, Radeon Pro 560X 4GB, 500GB SSD, 32" Samsung Display (2560x1440)
2 REPLIES 2
Barry Kelly
Moderator
I am not sure exactly what the step limit is but the space bar will allow you to jump up most steps.

Or of course just turn on fly mode.

Pressing Y or PageUp will turn on fly mode and lift you vertically.
H or PageDown will lower you.
Then move forward over a floor and press F to turn fly mode off and continue on your way.

This is in the desktop viewer, I assume there are similar controls in the mobile app.

Barry.
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11
Stress Co_
Advisor
If you don't want to switch to fly or Jump (as Barry noted), you could always
add a few slabs as steps. Set them to a Glass material (with transmittance set to 100).
i.e., make them invisible.
Marc Corney, Architect
Red Canoe Architecture, P. A.

Mac OS 10.15.7 (Catalina) //// Mac OS 14.2.1 (Sonoma)
Processor: 3.6 GHz 8-Core Intel Core i9 //// Apple M2 Max
Memory: 48 GB 2667 MHz DDR4 //// 32 GB
Graphics: Radeon Pro 580X 8GB //// 12C CPU, 30C GPU
ArchiCAD 25 (5010 USA Full) //// ArchiCAD 27 (4030 USA Full)