Documentation
About Archicad's documenting tools, views, model filtering, layouts, publishing, etc.

ZONE Fill Colour does not show in Master file

Anonymous
Not applicable
Hi,

I have an apartment with Zone coloured (yellow) as picture attached. When I saved as a MOD and brought into a master file, the Yellow colour of the Zone does not show anymore although the Zone is fine. I checked the Vectorial Hatching. Other Fills are still fine.

Does any body know what's missing?

Thank you
4 REPLIES 4
Barry Kelly
Moderator
The Graphic Overrides control whether the zones fills are solid or transparent.
You are probably using a different GO in the master file or the rules are not set up the same.

Barry.
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11
runxel
Legend
Barry wrote:
The Graphic Overrides control whether the zones fills are solid or transparent.
You are probably using a different GO in the master file or the rules are not set up the same.
Which would mean his signature is outdated (AC18/19)
Lucas Becker | AC 27 on Mac | Author of Runxel's Archicad Wiki | Editor at SelfGDL | Developer of the GDL plugin for Sublime Text |
«Furthermore, I consider that Carth... yearly releases must be destroyed»
Anonymous
Not applicable
Another reason could be: Different attributes with same index number in each file.
Hotlinked modules can become a nightmare if you don't regularly check attributes.
Hope that helps.
Anonymous
Not applicable
Hi,

Thanks for all your replies.

I worked it out. There are a floor slab and another overall zone sit on top of it. I shuffled the order and it worked.

Thanks again