cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Document & Visualize forum

camera angle

Anonymous
Not applicable
every time i want to bring up a 3d view of any floor

it always just comes up with the ground floor????

how do i fix this

thank you
8 REPLIES 8

Scott Bulmer
Booster
Could you please list the steps you take in projecting the model? Are you on the first story & select only the elements on that story, then project? If so, that's all you'll get. To get the whole enchilada you need to have either nothing selected when you project, or multi-story (dark marching ants) marquee around the area to be projected. Also check View>Elements in 3D View>Filter Elements in 3D to make sure you have not constrained the projection to your first story only.Hope that's what you're looking for.
Scott
AC25 v. 5005 w/ MEP, Cadimage, Twinmotion 2021 using AC from AC6.0, 2.7 GHz 12-Core Intel Xeon E5 (OS X 12.2.1 Monterey), AMD FirePro D700 6GB, SSD, Artlantis 2019, Adobe CC. Used AC on both platforms.

Anonymous
Not applicable
when i go onto perspective settings i can seen the 2nd floor which is DARk

then the ghost view of the 1st floor below it

i set the angles sun etc then press ok for 3d mode and the 1st floor comes up not the 2nd

not sure what im doing wrong here

Djordje
Mentor
sniperpirate wrote:
when i go onto perspective settings i can seen the 2nd floor which is DARk

then the ghost view of the 1st floor below it

i set the angles sun etc then press ok for 3d mode and the 1st floor comes up not the 2nd

not sure what im doing wrong here
screenshot please?
Djordje



ArchiCAD since 4.55 ... 1995
HP Omen

sniperpirate:

Please also post which version of ArchiCAD you are using. The options for controlling what appears in the 3D Window have changed between versions 9 and 10.

David
David Maudlin / Architect

www.davidmaudlin.com

Digital Architecture

AC26 USA • iMac 27" 4.0GHz Quad-core i7 | 24 gb ram • MacBook Pro 2.8GHz | 16 gb ram • OSX10.15.7

Anonymous
Not applicable
i am using version 9

i will try post a screen asap

Aussie John
Newcomer
is your camera elevation set to be in the 2nd Storey?
Cheers John
John Hyland : ARINA : www.arina.biz
User ver 4 to 12 - Jumped to v22 - so many options and settings!!!
OSX 10.15.6 [Catalina] : Archicad 22 : 15" MacBook Pro 2019
[/size]

Scott Bulmer
Booster
It looks from your screenshot that the camera may be inside the building for an interior shot. If that's the case and all you're getting is the first story then you need to raise the camera 'Z' height and target settings in the camera settings DB.
AC25 v. 5005 w/ MEP, Cadimage, Twinmotion 2021 using AC from AC6.0, 2.7 GHz 12-Core Intel Xeon E5 (OS X 12.2.1 Monterey), AMD FirePro D700 6GB, SSD, Artlantis 2019, Adobe CC. Used AC on both platforms.

Anonymous
Not applicable
yes in the picture it is of the 2nd floor

and ill try moving the z angle thx

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!