cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Document & Visualize forum

door and window indicator error

engjeancarlos
Contributor

I have doors and windows, whose text indicating the height and width are inverted reading orientation, the attached image shows that some are right others not, can anyone help me with this?

278501971_119317457388303_2739350644267885489_n.jpg

1 ACCEPTED SOLUTION

Solution
Miha_M
Advisor

I think it might be the wall angle is not aligned to the X axis. Could you check that?

Archicad 4.55 - 25 | HP Z840 | 2× E5-2643 v4 | 64 GB RAM | Nvidia Quadro M5000 @ Windows 10 Pro x64

View solution in original post

5 REPLIES 5

Solution
Miha_M
Advisor

I think it might be the wall angle is not aligned to the X axis. Could you check that?

Archicad 4.55 - 25 | HP Z840 | 2× E5-2643 v4 | 64 GB RAM | Nvidia Quadro M5000 @ Windows 10 Pro x64

I verified that it is aligned on the X axis as it should be, or it is imperceptible, I tried to align it with a horizontal line and nothing happened, I also dimensioned it with another horizontal wall, and it was exactly 180º.

DGSketcher
Rockstar

@engjeancarlos Sometimes the only way to force AC to be on the X-Axis is to drag the wall away by a significant amount and then reset it either by snapping to the X-Axis or entering the angle in the tracker coordinates.

Apple iMac macOS Monterey / AC26UKI (most recent builds)

Barry Kelly
Moderator

I would agree, the wall on the left (markers read from the left) is not exactly horizontal.

 

Barry.


One of the forum moderators.
Versions 6.5 to 25
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision 3510 - i7 6820HQ @ 2.70GHz, 16GB RAM, AMD FirePro W5130M, Windows 10

engjeancarlos
Contributor

were right, the wall was crooked

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!