Documentation
About Archicad's documenting tools, views, model filtering, layouts, publishing, etc.

graphics override

Claudio Lima
Booster

hi all !

 

any one have a solution for this modeling process ?

one wall and another wall as finishing .

then, I wanna GO so all the walls will be with the same fill, but, no line between them.

Captura de ecrã 2022-03-02, às 15.14.36.png

 

tnks

best

claudio

 

since ARCHICAD 3.42 to ARCHICAD 26
13 REPLIES 13

A complex profile can have as many finishes vertically as you want.

With modifiers you can adjusts the heights of these surfaces without having to create new walls.

You can even turn them off by stretching the height to zero.

 

Horizontally is another matter.

You have to split the wall.

But you can use the same wall composite with modifiers and adjust the height of the bottom material to zero.

 

BarryKelly_0-1646484294131.png

Barry.

 

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

hi barry !

I used to use complex profiles, but then, I started to have quantifications problems

It was in Archicad previous versions..., I will teste it...

tnks

c

since ARCHICAD 3.42 to ARCHICAD 26

nop, doesn't work...

since ARCHICAD 3.42 to ARCHICAD 26

For those schematic plans I just go for a graphic override turning cut fills into a Solid Fill, same pen color as wall outline fill.