Visualization
About built-in and 3rd party, classic and real-time rendering solutions, settings, workflows, etc.

"Picture 14" custom image display problem

muzedesigns
Participant
Hello!!

In my project I have used the "picture 14" object with custom images in several different locations.. However, for some reason, when rendering in Lightworks.. the picture objects with rotation of 90° rendersing the images correctly however those with a rotation of 0° the custome image is hardly visible..

Does anyone one have any advice - What am I doing wrong

Picture14example.jpg
Chrissy Avramidis
|| ArchiCAD Versions 7-22 ||
|| 27inch iMac Pro (2017) | macOS High Sierra 10.13.6 | Processor 3 GHz Xeon W | Memory 64GB 2666 MHz DDR4 | Graphics Radeon Pro Vega 64 16368 MB||
5 REPLIES 5
Dwight
Newcomer
I tested the element and find no problems.
Perhaps you should consult a priest.
different angles.jpg
Dwight Atkinson
David Maudlin
Virtuoso
Chrissy:

Are you sure that the pictures are not facing the wall?

David
David Maudlin / Architect
www.davidmaudlin.com
Digital Architecture
AC27 USA • iMac 27" 4.0GHz Quad-core i7 OSX11 | 24 gb ram • MacBook Pro M3 Pro | 36 gb ram OSX14
muzedesigns
Participant
Hi Guys.

Yes I am positive the are not facing the wall.. each picture has the same material - I drag a copy and rotate..
Chrissy Avramidis
|| ArchiCAD Versions 7-22 ||
|| 27inch iMac Pro (2017) | macOS High Sierra 10.13.6 | Processor 3 GHz Xeon W | Memory 64GB 2666 MHz DDR4 | Graphics Radeon Pro Vega 64 16368 MB||
muzedesigns
Participant
I have just downloaded Dwight's Parapicture and this works perfectly so am going to use this instead - saved the day again Dwight!

Thank you both for your help, as usual

Chrissy
Chrissy Avramidis
|| ArchiCAD Versions 7-22 ||
|| 27inch iMac Pro (2017) | macOS High Sierra 10.13.6 | Processor 3 GHz Xeon W | Memory 64GB 2666 MHz DDR4 | Graphics Radeon Pro Vega 64 16368 MB||
Barry Kelly
Moderator
muzedesigns wrote:
Hi Guys.

Yes I am positive the are not facing the wall.. each picture has the same material - I drag a copy and rotate..
Have you tried just rotating these a further 180°?

There was a post recently abiut the Picture 14 object where we discovered they have put a backing board in iot so the image can't be seen from behind.

http://archicad-talk.graphisoft.com/viewtopic.php?p=178021&highlight=picture#178021

Barry.
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11