Documentation
About Archicad's documenting tools, views, model filtering, layouts, publishing, etc.
SOLVED!

sandwich panel

Bara3
Booster

Hello I have run to a problem and I cannot solve it - how can I make these sandwich walls to intersect correctly? I have tried to change priorities but it did not work. I would also like to find a way how to make thick lines work properly.

Bara3_0-1650013926620.png

 

2 ACCEPTED SOLUTIONS

Accepted Solutions
Solution

This needs to be checked on material in composite settings.

 

mija_0-1650028607976.png

 


Archicad 25, build 4013
Montenegro

View solution in original post

Solution

Thank you, it also worked. 

View solution in original post

5 REPLIES 5
mija
Enthusiast

Hi

Make sure your Clean Wall & Beam intersections are on.

 

Thickness of lines are set in composite profiles settings.

 

mija_0-1650024800302.png

 


Archicad 25, build 4013
Montenegro
Miha_M
Advisor

Both elements should be stretched into the outside corner. All used materials to join should be equal. Both layers, if on separate layers, have to have the same intersection priority level (number). In On-screen view options you need to have Clean wall and beam intersections enabled.

| Archicad 4.55 - 27
| HP Z840 | 2× E5-2643 v4 | 64 GB RAM | Quadro M5000 | Windows 10 Pro x64
| HP Z4 G4 | W-2245 | 64 GB RAM | RTX A4000 | Windows 11

Thank so much, it worked.

 

Bara3_0-1650027037469.png

 

And I have one more question - why the thick line finishes earlier? I have tried different settings for the end of the wall in wall settings.

 

Solution

This needs to be checked on material in composite settings.

 

mija_0-1650028607976.png

 


Archicad 25, build 4013
Montenegro
Solution

Thank you, it also worked.