cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Document articles

Articles

ARCHICAD 18 Revision Tool troubleshooting guide

Revision History library object, line spacing issue Affected version: 18 | Severity: no workaround applicable | ID: 172837 Note: This issue was fixed in ARCHICAD 19 release version. Issue The line spacing of the Revision History object is lofty if on...

wp-content_uploads_images_Screen-Shot-2014-06-20-at-15.49.03-e1403272231414.png wp-content_uploads_images_Screen-Shot-2014-06-20-at-15.55.03-e1403272528966.png

Dimensions/Labels - Troubleshooting Guide

Known Issues Labels may be dislocated when opening an ARCHICAD 19 project in ARCHICAD 20 Affected version: 20 | Severity: workaround applicable | ID: 201188 Due to a fix in ARCHICAD 20 which corrects the position of mirrored and associated Labels cou...

wp-content_uploads_2016_06_mirrored-labels-1024x665.png wp-content_uploads_2016_06_Info_18x18.png wp-content_uploads_archicadwiki_troubleshooting-cutplanedimensionloss--dim222.png wp-content_uploads_archicadwiki_troubleshooting-cutplanedimensionloss--dim111.png

Editing Grids

Best Practice Grids are best set before sharing the project. If it is necessary to edit a grid element, it is best to have all other users release their reserved elements and you reserve all of the elements in the project. If your organization is lar...

wp-content_uploads_archicadwiki_teamwork-editinggrids--gridoffinwe.jpg wp-content_uploads_2016_06_Info_18x18.png wp-content_uploads_archicadwiki_teamwork-editinggrids--gridinfotag.png wp-content_uploads_archicadwiki_teamwork-editinggrids--gridinfotag2.png
automata by Graphisoft
  • 761 Views
  • 0 comments
  • 0 likes

Autotext Annotation

See also: How to Insert Autotext in ARCHICAD Help. The ProjectInfo database can be used as a location for stored annotations. These annotations can be then inserted into the project with AutoText. If you work on a plan where the annotations belongs t...

wp-content_uploads_archicadwiki_autotextannotation--01.jpg wp-content_uploads_archicadwiki_autotextannotation--2.jpg wp-content_uploads_archicadwiki_autotextannotation--3.jpg wp-content_uploads_archicadwiki_autotextannotation--4.jpg

How to make Curved Text in Archicad

The article is based on Dan Kunschik’s original post on ARCHICAD-Talk and has been updated for ARCHICAD 15. Summary of steps To create a curved text in ARCHICAD, a few tricks need to be employed. Text (created with the TextTool) can not be curved, so...

wp-content_uploads_archicadwiki_curvedtext--textarea.png wp-content_uploads_archicadwiki_curvedtext--alignment.png wp-content_uploads_archicadwiki_curvedtext--linesegment.png wp-content_uploads_archicadwiki_curvedtext--naming.png
automata by Graphisoft
  • 2336 Views
  • 0 comments
  • 1 likes

Level Dimensions and Gravity

See also: http://www.cadalyst.com/aec/how-display-elevation-values-relative-sea-level-archicad-insights-tutorial-3714 Level Dimensions Level Dimensions are point-level elevation markers common to architecture and site planning. They measure the eleme...

wp-content_uploads_archicadwiki_leveldimensionsandgravity--changeleveldimtext.png wp-content_uploads_2016_06_Info_18x18.png
automata by Graphisoft
  • 1073 Views
  • 3 comments
  • 0 likes

Sizing Text and Markers with Points

In ARCHICAD 9 and earlier, measuring symbols is one issue and measuring text adds an extra complication for anyone using Imperial units (e.g., US version). This article does not apply to metric users. Marker Size: For marker size, there are at least ...

wp-content_uploads_archicadwiki_sizingtextandmarkers--marker-points.png wp-content_uploads_archicadwiki_sizingtextandmarkers--point-point.gif wp-content_uploads_archicadwiki_sizingtextandmarkers--marker-points.png
automata by Graphisoft
  • 878 Views
  • 0 comments
  • 0 likes
Labels