Document articles
cancel
Showing results for 
Search instead for 
Did you mean: 

Articles

PlotMaker

PlotMaker was a layouting program that was part of the ARCHICAD package. This standalone application was optimized to prepare an architectural documentation set based on the views, drawings and images created in ARCHICAD. PlotMaker could also accommo...

ARCHICAD 18 Revision Tool troubleshooting guide

Revision History library object, line spacing issue Affected version: 18 | Severity: no workaround applicable | ID: 172837 Note: This issue was fixed in ARCHICAD 19 release version. Issue The line spacing of the Revision History object is lofty if on...

wp-content_uploads_images_Screen-Shot-2014-06-20-at-15.49.03-e1403272231414.png wp-content_uploads_images_Screen-Shot-2014-06-20-at-15.55.03-e1403272528966.png

Difference between Drawing and Figure Tools

This document was prepared in response to the ARCHICAD-Talk question of when to use the Figure Tool rather than the Drawing Tool. Drawing Tool Figure Tool What it inserts ARCHICAD views (internal or external), external drawings (DWG, DXF, DWF, DGN, P...

automata by Graphisoft
  • 175 Views
  • 0 comments
  • 0 likes

How to Use Standard Details in a Project

This article explains how to embed one or more standard detail drawings into your Project. In this example, we will embed a balcony and Wall-Slab intersection detail into our Project, and place it onto a Layout. We will also create a marker which con...

wp-content_uploads_archicadwiki_standarddetailsinaproject--embedstandarddetail-01.png wp-content_uploads_archicadwiki_standarddetailsinaproject--embedstandarddetail-02.png wp-content_uploads_archicadwiki_standarddetailsinaproject--embedstandarddetail-03.png wp-content_uploads_archicadwiki_standarddetailsinaproject--embedstandarddetail-04.png
Anonymous by Not applicable
  • 77 Views
  • 0 comments
  • 0 likes
Top Contributors