Choose your top Archicad wishes!

Read more
Libraries & objects
About Archicad and BIMcloud libraries, their management and migration, objects and other library parts, etc.
SOLVED!

I am trying to make a 150mm thick insulation.

LeeJaeYoung
Virtuoso

1. Profile Manger

LeeJaeYoung_0-1683012690367.png

I want to make it like this, but the reality is like this.
Is there any possible way?

Profile Manger

LeeJaeYoung_1-1683012796021.png

 

 

2. I made it like this.

profile manager

LeeJaeYoung_0-1683013039342.png

 

this is section

LeeJaeYoung_1-1683013129995.png

However, this gray section is created.
And even with SOE, the result is the same.

How can i solve it?

 

 

AC27 on window 11
1 ACCEPTED SOLUTION

Accepted Solutions
Solution

What if you don't include the slab insulation in the complex profile wall?

Just have the wall itself.

Then make sure the slab extends into the wall far enough.

Building material strengths should do their thing automatically.

 

BarryKelly_0-1683017467635.png

 

Barry.

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

View solution in original post

8 REPLIES 8
Barry Kelly
Moderator

What are we looking at - plan or section?

How do the first 3 images relate to the fourth one?

 

Barry.

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

SECTION

I wanted to solve it with No. 1, but it didn't work, so I proceeded with No. 2.

 

LeeJaeYoung_0-1683015430108.png

 

 

AC27 on window 11

OK, I still don't understand how the first 3 images relate to the fourth one.

 

If the fourth image is a section, how is it constructed.

Can you select the components and show their extents?

BarryKelly_0-1683015732119.png

 

If the walls and slabs all overlap and the building material strengths are correct, they should all trim automatically.

 

If we can't see how you have constructed it, it is going to be hard for us to give advise.

And remember that we do not have your composites and complex profiles set up, so it is hard for us to test what is happening.

 

Barry.

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

Number 1 has 2 images.

There are 2 images at number 2.

Number 1 is what I want to do. But no matter what I did, I changed the direction to number 2.
I'd like to hear an answer from you.

But I won't be number 1
Insulation is applied to complex profile walls.
That is the 3rd (1st of No. 2) image.

AC27 on window 11

 

LeeJaeYoung_1-1683017336979.png

And to illustrate the image you used, here's an image of the slabs being separated by pushing them back.

 

And I divided the complex profile into two.

 

LeeJaeYoung_2-1683017559219.pngLeeJaeYoung_3-1683017587571.png

 

AC27 on window 11
Solution

What if you don't include the slab insulation in the complex profile wall?

Just have the wall itself.

Then make sure the slab extends into the wall far enough.

Building material strengths should do their thing automatically.

 

BarryKelly_0-1683017467635.png

 

Barry.

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

I just quickly made a complex profile wall and composite slab to test.

Seems to work just fine.

 

BarryKelly_0-1683018858411.png

 

Barry.

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

I can't help but like your answer.
It always ends cleanly.

AC27 on window 11