cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Modeling
About Archicad's design tools, element connections, modeling concepts, etc.
SOLVED!

AC22 stair problem

Mats_Knutsson
Advisor
Hi,
Stair has a purple transparent surface cover and I can't understand why. It's not the BM nor the surface. It looks ok in the stair setting window...but in the 3D window...
/M
AC 25 SWE Full

HP Zbook Fury 15,6 G8. 32 GB RAM. Nvidia RTX A3000.
1 ACCEPTED SOLUTION

Accepted Solutions
Solution
Laszlo Nagy
Community Admin
Community Admin
This color usually indicates invalid geometry based on the settings and parameters.

Here is an example: You set the minimum Riser Height for the Stair to 150 mm. Your Story Height is 3000 mm and the Stair is set to be Toplinked to the Story above the Home Story. You create a Stair with 20 steps, so Riser Height becomes 150 mm, the minimum value.
Now, you go to the Story Settings Dialog and decrease the Story Height to 2800 mm. Since the Stair is Toplinked to the Story Height, the total height of the Stair should become 2800 mm, which means Riser Height should change to 140 mm, which is not possible since you specified that the minimum Riser Height is 150 mm. Thus the Stair cannot be generated, so it has invalid geometry and is displayed with this surface color.
Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27

View solution in original post

5 REPLIES 5
Anonymous
Not applicable
I think this particular color indicates that there is some corruption on the geometry.
Did you use any morph to create the stair?
If so, check if the original morph geometry is ok.
Hope that helps.
Solution
Laszlo Nagy
Community Admin
Community Admin
This color usually indicates invalid geometry based on the settings and parameters.

Here is an example: You set the minimum Riser Height for the Stair to 150 mm. Your Story Height is 3000 mm and the Stair is set to be Toplinked to the Story above the Home Story. You create a Stair with 20 steps, so Riser Height becomes 150 mm, the minimum value.
Now, you go to the Story Settings Dialog and decrease the Story Height to 2800 mm. Since the Stair is Toplinked to the Story Height, the total height of the Stair should become 2800 mm, which means Riser Height should change to 140 mm, which is not possible since you specified that the minimum Riser Height is 150 mm. Thus the Stair cannot be generated, so it has invalid geometry and is displayed with this surface color.
Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27
Mats_Knutsson
Advisor
LaszloNagy wrote:
This color usually indicates invalid geometry based on the settings and parameters.

Here is an example: You set the minimum Riser Height for the Stair to 150 mm. Your Story Height is 3000 mm and the Stair is set to be Toplinked to the Story above the Home Story. You create a Stair with 20 steps, so Riser Height becomes 150 mm, the minimum value.
Now, you go to the Story Settings Dialog and decrease the Story Height to 2800 mm. Since the Stair is Toplinked to the Story Height, the total height of the Stair should become 2800 mm, which means Riser Height should change to 140 mm, which is not possible since you specified that the minimum Riser Height is 150 mm. Thus the Stair cannot be generated, so it has invalid geometry and is displayed with this surface color.
Ah. Thanks Lazlo! Yes it's invalid but I had no idea the purple colour indicated that. Is it for stairs only?
AC 25 SWE Full

HP Zbook Fury 15,6 G8. 32 GB RAM. Nvidia RTX A3000.
Barry Kelly
Moderator
Mats_Knutsson wrote:
Ah. Thanks Lazlo! Yes it's invalid but I had no idea the purple colour indicated that. Is it for stairs only?

No, it is for other elements that can link to the storey level as well.
Such as walls where you can link the top of the wall to a storey level.
It is then possible to adjust the storey height so the top is below the base of the wall (i.e. it was a high bulk-head wall).
The wall will now be that pinky/purple colour.
Actually you can change the colour and turn this option off in the Work Environment >On- Screen Options > Use uniform colour to highlight inverted elements.


Barry.
One of the forum moderators.
Versions 6.5 to 27
i7-10700 @ 2.9Ghz, 32GB ram, GeForce RTX 2060 (6GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11
Laszlo Nagy
Community Admin
Community Admin
I think if you are using parametric offset modifiers in Complex Profiles, that can also result in invalid geometry:

https://helpcenter.graphisoft.com/user-guide/88577/
Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27