cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Setup & License articles

Articles

CodeMeter over the Internet

Running a CodeMeter network server - accessible over the Internet - may be useful if an office has more subsidiaries or a large number of workers working from home. With this solution they can use a central license key. The Wibu version of this artic...

wp-content_uploads_2016_06_Info_18x18.png wp-content_uploads_2017_10_Warning_18x18.png wp-content_uploads_2016_06_server_config.png wp-content_uploads_2016_06_serversearchlist.png

About WibuKey protection

Basic ideas WibuKey is a hardware protection key for ARCHICAD and other Graphisoft products. It has been used for ARCHICAD since version 7.0. Since ARCHICAD 13, both WibuKey and CodeMeter keys are available for ARCHICAD. From ARCHICAD 19 on only Code...

wp-content_uploads_archicadwiki_wibukey-aboutwibukey--0.jpg wp-content_uploads_archicadwiki_wibukey-aboutwibukey--11.jpg wp-content_uploads_archicadwiki_wibukey-aboutwibukey--22.jpg wp-content_uploads_archicadwiki_wibukey-aboutwibukey--wkconfigcontents.jpg

WibuKey Server

Compatibility Please note that ARCHICAD 19 does not support Wibu key protection, ARCHICAD 18 was the last version which can be run with Wibu keys. WibuKeys are backwards compatible. That is, a WibuKey programmed for ARCHICAD 16 can run previous versi...

wp-content_uploads_2016_04_Warning_18x18.png wp-content_uploads_2016_06_Info_18x18.png

CodeMeter Troubleshooting Guide

Check the error codes ARCHICAD gives The error code ARCHICAD gives can help you to discover the problem, also here you can find a collection about the most typical problem with solutions: CodeMeter/ErrorCodes Known Issues In this article you can find...

Hardware and software considerations

System requirements Official system requirements on GRAPHISOFT home page: BIMcloud 20 and BIM Server 20 BIMcloud 19 and BIM Server 19 BIMcloud 18 and BIM Server 18 Recommended hardware for GRAPHISOFT products: Recommended hardware on Help Center Oper...

wp-content_uploads_archicadwiki_moniker-images_alert.png

Limitation Of Ports That Wibu Scans

KarlOttenstein's tip on using the WIBU -Key Control Panel! "(...) The sometimes considerable delay while ARCHICAD is starting is actually the WIBU protection key driver searching all ports for the key. You can change things so that only the proper po...

wp-content_uploads_archicadwiki_wibukey-limitationofportsthatwibuscans--1.jpg wp-content_uploads_archicadwiki_moniker-images_smile.png wp-content_uploads_2016_06_Info_18x18.png wp-content_uploads_archicadwiki_wibukey-limitationofportsthatwibuscans--02.jpg
automata by Graphisoft
  • 189 Views
  • 0 comments
  • 0 likes