Missing photorendering palette (out of sight)

[sityu]

Formerly I used double monitors, now I had to change back to single.
So the photorendering palette disappeared. Probably shows somewhere out of the range of the (single) monitor.
I tried many things:
-clicking in menu, then alt, then down arrow (to get the palette repisotion);
-screen resolution change;
-the virtual desktops of w10 doesn't inculde it;
-regedit searches;
-ArchiCAD Basic.prf deletion;
-etc.
-the easiest would be getting a second monitor (but for some cases, it's hard a little);

Any suggestions?

[DGSketcher]

If hide and show photorendering settings in window > pallets doesn't work have you tried Options > Work Environment > Apply Profile > Standard... This will reset all your pallets so I hope you haven't done too much customising.

[Erwin Edel]

It doesn't seem to be tied to anything saved in work-environment either, that would've been my suggestions.

[sityu]

DGSketcher wrote:
If hide and show photorendering settings in window > pallets doesn't work have you tried Options > Work Environment > Apply Profile > Standard... This will reset all your pallets so I hope you haven't done too much customising.

Tried. Didn't help.

[DGSketcher]

Installation reset?

http://helpcenter.graphisoft.com/troubleshooting/setup/repair-archicad/

[sityu]

Success!

I've tried to delete the ARCHICAD Basic.prf file in C:\Users\<UserProfile>\AppData\Roaming\Graphisoft\ARCHICAD-64 xxx.
Restarted the ArchiCAD; but no change.

It needed a complete system reboot, and it works!