cancel
Showing results for 
Search instead for 
Did you mean: 

Presenting multiple models in one BIMx Hyper-model

Csaba_Kezer
Graphisoft Alumni
Graphisoft Alumni

Have you ever thought about what would be the best way to present design alternatives to Clients? Or did you have a Renovation project where you struggled with presenting different stages of the reconstruction? Search no more because BIMx Hyper-model gives you the possibility to do that in the most intuitive way.

In this article we have examples of three different projects presented in BIMx showing different 3D model states. Let's take a look at these scenarios to give you an idea about what BIMx is capable of with multiple 3D model views:

1. Showing different construction stages

You can filter a building’s structural elements with Partial Structure Display in ARCHICAD. This enables hiding finishes of the building or showing only load bearing structures - this can be useful to check the statical frame of the building at the construction site for structural engineers:

 

Entire buildingBuilding without finishesStructural model

 

wp-content_uploads_images_entire-building.jpg
NHS Office Complex - Ivo Venkov PAASTUDIO - Los Angeles, CA

 

 

wp-content_uploads_images_building-without-finishes.jpg
NHS Office Complex - Ivo Venkov PAASTUDIO - Los Angeles, CA

 

 

wp-content_uploads_images_load-bearing-structures.jpg
NHS Office Complex - Ivo Venkov PAASTUDIO - Los Angeles, CA

 

 

2. Presenting design alternatives with Layer Combinations

If there are more than one designs for a project and you would like to show all of those to the Client simply, you can save 3D views in your ARCHICAD project with different Layer Combinations each showing only one of the designs. For example there are four proposals for an exterior of a family house. If all of them are visible in the same .PLN file you can put their views into the BIMx file to get this result:

 

Design variation 1Design variation 2Design variation 3Design variation 4

 

wp-content_uploads_images_design-variation-1.png
Residential Project - Ausbuild Pty. Ltd. - Queensland, Australia

 

 

wp-content_uploads_images_design-variation-2.png
Residential Project - Ausbuild Pty. Ltd. - Queensland, Australia

 

 

wp-content_uploads_images_design-variation-3.png
Residential Project - Ausbuild Pty. Ltd. - Queensland, Australia

 

 

wp-content_uploads_images_design-variation-4.png
Residential Project - Ausbuild Pty. Ltd. - Queensland, Australia

 

 

3. Renovation Status display of the project

When a building is renovated you have separate stages of the reconstruction such as existing state, demolish works, new construction etc. These stages can be shown in ARCHICAD with the Renovation Filters. Elements highlighted with yellow color are 'to be demolished' while new construction is marked with red. This way you can get a quick overlook of the building refurbishment:

 

Existing BuildingDemolish worksNew constructionRefurbishment completed

 

wp-content_uploads_images_Existing.png
Renovation of a Residential and Office Building - Trunt Immobilien Gmbh + Co. - Altenberge, Germany

 

 

wp-content_uploads_images_demolish-works.png
Renovation of a Residential and Office Building - Trunt Immobilien Gmbh + Co. - Altenberge, Germany

 

 

wp-content_uploads_images_new-construction.png
Renovation of a Residential and Office Building - Trunt Immobilien Gmbh + Co. - Altenberge, Germany

 

 

wp-content_uploads_images_refurbishment-completed.png
Renovation of a Residential and Office Building - Trunt Immobilien Gmbh + Co. - Altenberge, Germany

 

 


How to create such BIMx models?

First of all we need an ARCHICAD BIM model containing all the necessary information we would like to show in our BIMx file. To have multiple 3D models in one BIMx file we set up 3D views in ARCHICAD filtering the BIM data according to our goal with view filter options:

 

wp-content_uploads_2014_06_01-1.png

 

Use Layer Combinations, Partial Structure Display options, or different Renovation Statuses to present different stages/variations of the project. When the 3D views are created we open the Organizer from Document > Publisher... and set up the BIMx Hyper-model Publisher set. Check the step-by-step guide how to create a new Publisher set here. We place the model views into the publisher set with the drag & drop function:

 

wp-content_uploads_2014_06_02.png

 

After pressing the Publish button the BIMx Hyper-model is saved (either to the BIMx cloud or to our local machine). Transfer the file to your iOS device, as a result you will see all the 3D views in the file:

 

wp-content_uploads_images_models-list.png

 

wp-content_uploads_2016_06_Info_18x18.png
This works with layouts as well, there is absolutely no restriction on what you can put into one BIMx Hyper-model. All of the placed 3D views and the layouts can be viewed by anybody for completely free of charge. Viewing layouts doesn't require a paid license any more.
Top contributors
About
Last update:
‎2021-10-26 04:20 AM
Updated by:

Still looking?

Browse more articles

Back to articles

See latest solutions

Accepted solutions

Start a new discussion!