2023-02-14 08:21 PM
It would be great if there were a model view option override to change windows and doors to simple recessed solid opening to aid with 3D printing.
2023-02-15 02:11 AM
Schematic turns them into a single plane.
Does this help?
Or 'Simplified' will have a simple frame.
Barry.
2023-02-15 02:25 AM
No way for you to set your printing software to do like a 20% infill to voids and cantilevers?
AC22-23 AUS 7000 | Help Those Help You - Add a Signature |
Self-taught, bend it till it breaks | Creating a Thread |
Win11 | i9 10850K | 64GB | RX6600 | Win10 | R5 2600 | 16GB | GTX1660 |
2023-02-15 08:40 AM
You can but that is generally for support whilst printing and is then removed especially for cantilevers. I’d almost like the windows and door openings to be replaced with a deep niche so you just get the simplified opening without having to change the entire model every time I want to print it.
2023-02-16 01:54 AM
Ah, so you are wanting an indicative opening without there being an actual penetration.
AC22-23 AUS 7000 | Help Those Help You - Add a Signature |
Self-taught, bend it till it breaks | Creating a Thread |
Win11 | i9 10850K | 64GB | RX6600 | Win10 | R5 2600 | 16GB | GTX1660 |
2023-02-16 08:19 AM
That’s right yes. It would be nice to be able to almost print directly from the model without acing to do lots of preparatory work.