Wishes forum
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Modify the module in the master file

For a concern of a homogeneous workflow and for a concern of a good use of the memory vive it would be preferable that the edition of the module is done on the same master file, the idea is to modify the module as a staircase or Like a curtain wall 1...

Rotating the hotlink on the axes (x, y, z)

If this idea is taken into account it will give a significant improvement for archicad, imagine: 1-To draw a curtain wall panel in a module, to rotate on an axis (x) in the master file becomes possible in case of modification of the panel, when the m...

I wish all Anchor Points Showed up when modeling 2D & 3D

I wish all anchor points for all elements, objects, and especially doors and windows were visible as a node that was a subtly different color than the regular window and door nodes/dots. This stems from the fact that every object has an origin, which...

Gus by Newcomer
  • 9273 Views
  • 12 replies
  • 0 likes

Complex Profiles

It would be great if you could turn on or off the visibility of selected edges on plan views for complex profiles.

Anonymous by Not applicable
  • 1057 Views
  • 1 replies
  • 0 likes

Railing | Top Rail and Rails Settings

So far, I'm pretty impressed with the new Stair and Rail Tools -- I just wish the Help was more helpful. Not a deal-braker, but it would be nice to be able to control the ends of the rails similar to how the top and bottom of posts can be controlled ...

Stair tool input method.

Stairs should connect just two different points. If too steep tends to be ladder if too lowly tends to be ramp. Depending on inclination the structure changes too, rarely you can find steep concrete stairs and if you do they mostly have an inset at t...

Anonymous by Not applicable
  • 1803 Views
  • 2 replies
  • 0 likes

Complex profiler in the shell tool

It would be nice to introduce the complex profilers in the shell tool -This would make it possible to exploit the data of the complex profile on varied construction plans -This will improve the possibilities of architectural design -Is my most expens...

Walking Line in Stair Tool in AC21

The walking line symbol does not orient properly with regard to the up/down text. The walking line should point up from the lower floor and down from the upper floor. Walking line always points in either the up or down direction, depending on setting...

Correct 3D View Of Wrapped Columns

I believe I should be able to see a wrapped column displayed in 3D as it is displayed in 2D. When it's a veneer option, the display is correct; but not when it's wrapped.

Anonymous by Not applicable
  • 956 Views
  • 0 replies
  • 0 likes