Design forum
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Project info on master layout

How do you guys add basic project and company info to your master layouts?I have seen two options so far, one is with a worksheet and a drawing tool. And the other is option is crating a Label and using the label tool.What are the benefits and drawba...

Archicad Competency Test

Hi Community, Since the new community website has been launched, I thought this would be a great time to share the link for the online Archicad Competency Test. Good luck! Regards Matt...

Door Leafs missing

I don't think they are missing but new styles are ignored Opened a model that was correct on laptop On desktop the leafs do not show And if I change the leafs - no change - just a flat panel or lo leaf - can't tell

House - Bent shell roof

ASM Techbase next Quick Coffee Tip is ready. This tutorial is showing you how to create a nice roof shape using the shell tool. Enjoy Carsten Link:

Resolved! Drawing Gable End Walls with Break Line in Plan

Is there a way to automatically have a wall break in plan where the floor plan cut plane is for a gable end wall (or other walls that slope down through the break line, such as below stairs)? If not, how do you like to handle this type of condition? ...

EH21 by Booster
  • 3 replies

Which element to bend UV mapping?

Is there an element that when bent will also bend the material mapping? I tried slabs, walls and beams but the top part of the element is always mapped without taking into account the bend:

JohnJay by Newcomer
  • 5 replies

Resolved! Best method to model a driveway composite

I've seen various workarounds for how to create a sloped driveway using copies of meshes with SEO etc, or with numerous roofs etc, but never quite get the desired result. With meshes you can't do a composite, with roofs you end up with many separate ...