I have an employee with an educational license under her own graphisoft
ID. She also has a graphisoft ID under her company email. When she logs
into the license manager with her company ID, downloads a commercial
licesnse, then goes to ope a company ...
Hello : I am familiar with most of AC 18 but have not used the morph
tool. I’ve written a number of GDL scripts which allow me to define
posts and beams with tenons at each end. Parameters of these are set in
the scripts. And that data can be exporte...
Hi, my name is Merlin, I'm an architecture student from Germany. I'm
trying to create the same style of plan drafting as shown in the photo
example I attached to this message. I'm wondering, if this is possible
with Archicad exclusively, or do I need...
Hi there, I've learnt how to model a site model for a project which
includes a slope. I have accidentally modelled using the wrong
measurements but is still to scale. i.e. 10metres as 100 000mm instead
of 10 000mm. Essentially, I've added an extra 0 ...
So, I'm going to try my best to write everything that we've tried, and I
would really appreciate it if someone could lead me through the process
that will succeed finally. The first thing we did was follow the
tutorial from Youtube, installed everyth...
I am using a 3 layers slab with the middle one made of insulation. I
need it to connect with the insulation on the mid layer of the vertical
wall (the vertical wall is composed of 2 walls one at the bottom and one
on top): how can I achieve this? Tha...
Hi guys, I have to make an inclined slab. As I can understand I can use
the roof pitch tool but what abot the itersection with walls? If I use
the Connect command I cut the upper part: how do I cut the bottom part
without trasforming the wall into a ...