I simply can not understand how to scale site to fit on a drawing sheet.
I scale down the site but when I transfer it to sheet it goes back to
full 1 to 1? what am I missing?Archicad 20 Windows 10 Dell Inspiron
Has anyone here managed to successfully create an automatic drawing
issue sheet? We like to do it in a grid like style so you can easily see
previous issues and the current issue for each layout in the drawing
set. The current setups are all a bit to...
I'm trying to create an ironmongery schedule which includes different
element types (railings, windows, zones and objects). I would like to
have two fields in the schedule - Length and Width/Height - and have the
sizes of all the ironmongery elements...
Hello fellow workers, I have some railings that are being used for
fences in a project. They are 80 metres long in some cases. They have
quite a few vertical balusters. When I have several railings as one
length it takes say 5 seconds for it to regen...
Archicad 20 THE SLAB WILL NOT SH0W IN SECTION BUT IF YOU CLICK ON WHERE
IT IS SUPPOSED TO BE IT LIGHTS UP AND SHOWS THAT IT IS THERE. I TRIED
ERASING IT TO MAKE SURE THERE WAS NOT TWO WITH EACH ONE HIDING THE
OTHER. ALSO, I MADE SURE THAT IT WAS NOT ...
Good day to you, kind sirs and madams! A column in Archicad has a
listing parameter "Maximum height of the Column". It returns values
correctly if a column is cut by a roof or is not. If I create a column
with the top or bottom cut at a custom angle ...
Why must tools change so much and not necessarily for the better?
NOMINAL SIZES dialog - I would expect the casework tool to start by
selecting the over all size, which is the first dialog you come to.
Great!SEGMENT GEOMETRY dialog - I would then exp...
Hi everyone, I have a question, the dimension tool in elevation is not
good looking when the line is on the right side (the line on the left
side is OK). It is longer than the text. Can we make the line align with