Wishes forum
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Thickness to a mesh

It would be good to be able to apply thickness to a mesh when modelling a slab with multiple levels... instead of having 2 meshes and doing a SEO to get the thickness

Yvonne by Booster
  • 855 Views
  • 12 replies
  • 0 likes

Change Wall Reference Line: Remember Last Setting

The wall reference line is a essential thing in Archicad, and so is the tool for changing it. I wish to have an option (so nobody is forced to this behaviour) that the last option chosen in the dialog will be remembered. Maybe this could go even furt...

runxel by Mentor
  • 839 Views
  • 4 replies
  • 0 likes

Trace and Reference to be available in the Profile Editor

Wish: To allow Trace & Reference to be used in the Profile editor window. Then it would be much easier to build profiles that fill in transitions of floors/Walls, Walls to roof and many other uses. Otherwise I have to measure and re-draw a mock 2D im...

3D Cutplane Sets

I use 3D cutplanes intesively, and I assume, everybody who does 3d modeling to any extent does as well. The wish is a wish to save cutplanes for later use. Yes, they are saved inside of a view. BUT also a lot of other stuff (like the camera position ...

runxel by Mentor
  • 303 Views
  • 1 replies
  • 0 likes

Partial Structure Display for stairs

Considering we can change structure (which is pretty much the core) and finishes, it would be good to be able to display construction elements in the stairs using on the partial structure display like you would a composite (wall, roof etc).

Yvonne by Booster
  • 303 Views
  • 1 replies
  • 0 likes

Wall End

I just noticed that if I use a wall to SEO a slab or mesh (or anything else, I presume)... the wall END will NOT cut the TARGET element! This is disheartening as all my meshes will have a little EXTRA SLICE where they meet a wall with a wall end... F...

OPENING TOOL

I use the opening tool on a regular basis and find it extremely helpful. Now I'm spoiled and want more: The feature development for this tool I would find super useful would be to customize the opening of the cut element/slab/ composite. i.e. if I'm ...

Add Composite Selection to Surface Mesh Type

The mesh tool provides three types: Surface, Skirt, and Solid Body. However, the growth of BIM has increased the demand for technical site accuracy. BIM visualization and technical coordination for civil, hardscape design, and landscape architecture ...

Marc H by Beginner
  • 372 Views
  • 2 replies
  • 0 likes