On some occasions, when modeling in 3D, out of haste or comfort, I place objects or mep parts at heights much higher or lower than the floor level. So then they don't show up on the floor. When I change them to the corresponding floor these objects m...
I'd like to have an option within the profile manager where we could set a height at which the wall/column/beam would display as a symbolic cut. Most of our walls are complex profiles and sometimes I need a symbolic display. I like to avoid using cov...
Please, add a tool to make it easier to split curtain walls, just like we can use Ctrl + Click to divide lines, walls, beams...
In section you can currently "pull" / "stretch" walls & roofs in section, however, slabs can only be edited on floor plan. This would be helpful when we are having the use slabs as beams, as there is no polygonal beam/column option.
It would be great if it were possible to add multiple outlets to the gutter outlet for larger commercial schemes. We can add multiple objects for the various downspout connection on the same run but it would be better if it were possible to add addit...
Could we please finally have the option to add a threshold to the bi-Folding Door in the library.
It would be great if it were possible to be able to place a door by the inside of the frame when converting survey data. Most surveyors still only provide 2D which we trace off and they measure the openings from inside face of frame to inside face of...
Hello to all! First, I want to post this image... and you can guess what's the different between lift and right there: Yes, left I use walls, right there a beams – they intersect basically differently.In many situations it is necessary that that beam...
It is a disconnected workflow that I have come across, at the time of being in a meeting where I present the BIMx hypermodel and some virtual tour (with clients, consultants and/or specialists). Many times the annotations and comments go outside as i...
Walls that border private units in an appartment building are generally constructed of two load bearing walls (concrete or other) with a thin layer of acoustic insulation between them. Sadly a composite doesn't allow to have a core skin either side o...
