The Master format classification system has a typical character size of xx xx xx --> 8 characters, in some instances it has three more characters like xx xx xx.xx which is 11 characters. Using the...
I am using AC26 and exported to a BIMx file. The sheets were visible in BIMx and when I tried to open in 3D, this is the message I got: "This Hyper-model was created in an unsupported version of Arc...
I am on a waste water pipe plan. I make a route with a slope of 3%. If I want to readjust the length in plan I notice that it removes the slope of the readjusted section. If I readjust in 3D it works...
Hello In this file, there are many solid elements operations concerning the site terrain and some between walls and false ceilings, but not on the walls the doors belong to. The file size is 650 MB....
Model was working fine, then all of a sudden my 3d window went completely blank. I have been trying to fix this for hours and sometimes I am able to see a wall or 2 in perspective, but I am una...
Here is something that consistently bugs me: Working on a Mac, when Archicad is opening, it jumps to being the active application several times during the opening process. If I am working in another ...
Have had this issue for years and finally frustrated enough to post about it. The way I do Interiors is placing a solid fill over the room, only highlighting the extents of the elevated wall. On the ...
Hi All, I have a requirement from my client to convert the archiCAD PLN extension files to JSON, without losing the properties. Can you guys suggest a way? Thanks in advance Roni Vincent.
Hi Guys, i dont know if this bug is already mentioned but i found one.. when you are using Design options and you have multiple elements, in my case i made 48 small pieces of wall ...
Good morning, I tested the AC27 technology version and I noticed that there is no way to control the slopes of the MEP networks once placed. Neither in the tool nor in the classification manager. I h...