On my latest project, I am hotlinking a building into a host model with
different story settings. Everything is fine - I select "keep elevation
of hotlinked module" option. EXCEPT for the elevators which seem to
automatically revert to the host story...
for those who are still using EDS... If I create a “baseline” building
and compare it with itself, I’m getting different results in energy use
between the Proposed Design and the Baseline Building, although they are
exactly identical... SOS...
Could GS advise on the current status of ECODESIGNER STAR. One gets the
distinct impression that it is a dead end project since there are no
serious answers from GS to real problems. I am involved with clients who
request zero energy buildings and I ...
Using Ecodesigner has been at first without any particular problems
however when going a little deeper into it, there are some issues that I
would have thought need some attention and/or clarification from GS.
Ecodesigner is a very important componen...
Anyone has a good workaround for situations where thermal zones partly
span 2 or more floors and partly just 1 floor? The basic problem I have
is that the zone recognizes openings and structures located on the
zone's floor. One could argue that by gi...
Hello Minh, We are nearing one year down the track from these
observations on Ecodesigner, prompting me to get back to you to have a
clearer picture of the current situation. Is Ecodesigner still part of
Graphisoft long term plan, and if it is when a...
Well yes thanks Barry, I am only an architect, not a software developer.
I can only point at this being a problem - and it is a problem. How and
who resolves it, I do not know. Appreciate the feedback.
Yes I gathered that much, it was a rhetorical question.... which is a
problem, since other construction elements do keep their original
elevations without taking the host story settings into account ( it is
in fact an option when you link a module, l...
Hi Minh, Updated the Intel Graphics driver , same problem. I also
updated the NVIDIA driver for the GTX 1660ti card in the laptop...
Actually one monitor is attached to the HDMI port of the laptop - which
is recognised by the GTX as an external monit...
Same problem with AC 24 4007 and my Dell G3 with external monitor...
Cannot start AC on external monitor, it just gets to the Archicad file
interface but just hangs, with part of the interface on the laptop scren
and the main AC window on the externa...
