About jagber

jagber · 2023-04-02

I'm trying to add custom sized wainscoting to my walls. I've managed to create custom complex profiles which are working more like cornices which you can draw on 2D floorplans. I can't get them to go vertically, only horizontal. I'm drawing them on a...

jagber · 2022-09-26

I have a schedule for electrical items which used to work until recently. For some reason the cost field isnt coming through for any items on the ground floor but it works on the first floor. I copied some GPO's from the first floor to the ground flo...

jagber · 2022-05-12

I have a project that contains a wall with rendered lines as shown below. I did this a long time ago and I cant remember how it was done. When I move the wall the lines dont follow it and from memory it seems like the cuts are separate from the wall....

jagber · 2022-01-20

Im relatively new to Archicad and I need to create a window schedule that shows the direction of the window opening for a sliding window. It seems like you cant change sliding windows to show the arrow on the right when choosing the single arrow opti...

jagber · 2023-04-05

Thank again, spot on with the recommendation. When I viewed it in the wall it looked different to when it was pulled away from the wall. Is there a way to turn it 90˚ by default so that plane are the same for the beam and the column?

jagber · 2023-04-03

Thanks David, appreciate the tips. Ive updated my profile. I realised I had set it to use with a Column too. Im getting an unexpected result though when the column is used. As you can see in the image, the column is significantly smaller than the bea...

jagber · 2022-09-30

Thanks for the help. I managed to figure it out before seeing this. I had to do this and I think unlock everything too.

jagber · 2022-09-28

It looks like one of the items is hidden + locked. I tried showing all layers but I cant seem to resolve this.

jagber · 2022-09-28

@Andrii Levko wrote:It's hard to say without seeing all setting of schedule. It may be some item on Ground floor has wrong classification or other criteria and value in this field is not shown, because probably "Marge items" is marked. For the beginn...

User Statistics

User activity

Wainscoting - Custom Size and Verticals

Schedule field not showing from one floor level only

Wall extrusion edit for french provincial look

Sliding windows arrow on right

Re: Wainscoting - Custom Size and Verticals

Re: Wainscoting - Custom Size and Verticals

Re: Schedule field not showing from one floor level only

Re: Schedule field not showing from one floor level only

Re: Schedule field not showing from one floor level only