When a .pln file is opening you can see a windows that shows the
creation date and the las modification date of the project, is there
anyway you can edit this or any indications where those data are stored
Hello guys, I'm trying to reproduce a stair that has been reported
during the survey, the main difficulty I have encountered so far are: to
start the stair with half a winder, so the workaround I found for this
is to start from the top of the stair a...
I have to build a road on sloped terrain, along the path thickness and
width both varies, the best way to document those changes would be to
make a series of cross sections of the road, the thing is that section
marker seems to cut the road only vert...
Yes you are right and in fact I already tried to change the file
metadata of the filesystem but it has no influence on the creation date
shown by the archicad loading windows while opening the project, I also
know that you can call upon those date in...
I do confirm that selecting the edges instead of the nodes the quote
return effectively the right thickness, I did change the roof edge
setting a couple of time to see if it change something: it seems it
doesn't. Anyway I post my initial roof setting...
at that time i did not check as it should the same setting as the other
quote, but I'll check right now .... It is set to measured value By the
way I also tried to set the working plane parallel to the custom cutting
plane before I inserted the quote...
Ok I shared some picture: 00 to show the cut plane (45°) 01 a first 3D
document with some annotations to explain what is what with right quote
for both objects 02 another 3D doc with a different angle with right
quote for both objects 03 the 3D docum...