1) Roof Outlines - I want to see a dashed outline of the roof eave from
the floor immediately beneath the roof, but a solid line for any view
from above. The Pivot Line for Single Slope roofs seems to always be
solid. If I set Outlines to be Dashed, ...
When i right click for the popup menu to search under "Move" for the
"Drag Copy" command, it shows a key shortcut of "option-command-D" On a
mac, when i press option-command-D, I don't get "Drag Copy"
"Option-Command" gives me "Inject Parameters" & t...
i am creating the eave of a porch the barge board from the gable end is
touching the end of the fascia board that holds the gutter it is trying
to miter the two beam elements as they touch i just want to see the
vertical end cut of the barge board te...
i have a series of exposed rafters that I positioned at an eave. I
started moving them vertically in a section view & subsequently realized
that I only grabbed some of them due to the section view, so I have a
little mess in the z axis. The rafters a...
I'm an Archicad beginner, so this is likely me not yet understanding the
program. Thanks up front for your patience & assistance! first project &
trying to set up plot sheets & test print In master, all text/linework
is on layer g-title blocks.2d On-...
Miha_MLooking at your image also provoked looking at the Floor Plan
Display line, which you show as "Projected with Overhead"...I believe
that <<<--- is the thing that gets the dashed line.[I had it set to
"Outlines Only"][EDIT TO ADD]nope, still sho...