I have just had the opportunity to test a machine with a decent graphics
card that can make use of the Redshift render engine. I found that the
images all seemed a little over-exposed, so I thought I would check out
the HELP files to see if there was...
I am not sure how the software licenses work as I don't use them, but as
far as I know there is nothing silent about working in demo mode. You
should always be prompted with this if there is no license. You have to
agree to run in demo mode as far as...
The slab itself (perimeter) has to be shown on the home storey. There is
no way to turn it off. The cover fill can be turned off on the home
storey with the custom options. If you never want the slab to show on
the actual storey (above storey) why no...
I may be missing something very obvious here but I have a problem.I want
to add text to a door object that shows the height of the lintel above
it.I am not interested in a separate label (I am pretty sure that would
be possible, but it is not what I ...
@enjoystick1 wrote: Hi Berry, thanks for the reply. I think most
contemporary houses don't have that covering board, Even that image you
show has a small capping/flashing? The problem is you have modelled the
roof quite thick, I assume to allow for t...
@DGSketcher wrote: @Barry Kelly Turning off the section range destroys
the view depth and risks loosing data e.g. dimensions, if that's what
you are suggesting? Plus turning the range lines off in View settings
doesn't stop them being selected. No, n...
Thanks for that James. Nor when you swipe an area to select elements.
And if there is an element exactly on the break line, it will select the
element before the break line even when you select by a node of the
element on the break line. Just an issu...