I am not sure how the software licenses work as I don't use them, but as
far as I know there is nothing silent about working in demo mode. You
should always be prompted with this if there is no license. You have to
agree to run in demo mode as far as...
The slab itself (perimeter) has to be shown on the home storey. There is
no way to turn it off. The cover fill can be turned off on the home
storey with the custom options. If you never want the slab to show on
the actual storey (above storey) why no...
I may be missing something very obvious here but I have a problem.I want
to add text to a door object that shows the height of the lintel above
it.I am not interested in a separate label (I am pretty sure that would
be possible, but it is not what I ...
I have no idea as I don't use software licenses. But I can imagine it
would not be possible as your company would have specific licenses
assigned to it by Graphisoft. Just as you have yours. However if it is a
software license, there should be no iss...
If these are parameters in your rafter objects, Then in the schedule
settings, there is an option to add parameters. You then need to browse
for the rafter object and the parameters you want to add. If you can't
figure it out, let me know - I don't h...
No need to really. Once you have read the post, just return and it will
be gone from the list. Otherwise you can tick the box to the left of the
post/s, then at the top left in the options, you can mark them as read.
So (just to confirm) in the License Manager, you key says it is at least
version 23? Try moving the key to a different USB port if you can.
Sometimes just moving it around is enough to make it be found. Or at
least unplug it and then plug it back in....
When you select by clicking (as opposed to defining a selection area),
there are 2 ways to select. Clicking on an edge/node of an element or
clicking on the surface. To click on a surface you must have the 'quick
selection' magnet active, either turn...