Collaboration with other software
About model and data exchange with 3rd party solutions: Revit, Solibri, dRofus, Bluebeam, structural analysis solutions, and IFC, BCF and DXF/DWG-based exchange, etc.
SOLVED!

Converting a Archicad Model into a .STL file

cadsph
Enthusiast

Hi,

Does anyone know the easiest way to convert an Archicad model into an .STL file?

Also, I'm guessing the model would need to be scaled also say to 1:100 to be printed. 

 

It's for 3D printing. 

1 ACCEPTED SOLUTION

Accepted Solutions
Solution
Andrii Levko
Expert

The easiest way is open model in 3D window and save as .STL file. On the Save 3D as STL dialogue choose  Binary or ASCII representation and set scale 1:100 or other scale what you need.

Andrii
AC 8.1 - 27 INT/POL 3001
Win11 | Ryzen 5600 | 16 GB | GTX 1650

View solution in original post

2 REPLIES 2
Solution
Andrii Levko
Expert

The easiest way is open model in 3D window and save as .STL file. On the Save 3D as STL dialogue choose  Binary or ASCII representation and set scale 1:100 or other scale what you need.

Andrii
AC 8.1 - 27 INT/POL 3001
Win11 | Ryzen 5600 | 16 GB | GTX 1650

Andrii,

You are a LEGEND!