Choose your top Archicad wishes!

Read more
Collaboration with other software
About model and data exchange with 3rd party solutions: Revit, Solibri, dRofus, Bluebeam, structural analysis solutions, and IFC, BCF and DXF/DWG-based exchange, etc.
SOLVED!

Aluminium handle bar

Bidaya
Contributor

Hi everyone

I'm looking for an aluminium handle bar (the bars that have the height of the door and that you pull or push).

I have tried to create a custom one with a cylinder but unfortunately it does adapt to different heights for different doors.

Thanks for help.

Best regards.

1 ACCEPTED SOLUTION

Accepted Solutions
Solution
Lingwisyer
Guru

Yet custom handles on cabinets have size parameters that you can change... GS inconsistencies as usual... It is not even that the parameter does not exist, it is just that it is only available in the handle macro itself and is set to fixed values depending on the handle chosen...

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win11 | i9 10850K | 64GB | RX6600 Win10 | R5 2600 | 16GB | GTX1660

View solution in original post

7 REPLIES 7
Rajesh Patil
Expert

Door handles appear always with their fixed size. You can only place them on required location over door leaf surface hence design different handles for different sizes.

Rajesh Patil
AC 09-27 | INT | WIN11 64
Dell Inspiron 7591, Core i9, 9880H 2.30GHz, 16.0GB, NVidia GeForce GTX1650, 4.0GB, SSD Internal 500GB, Dell SSD External 250GB
Solution
Lingwisyer
Guru

Yet custom handles on cabinets have size parameters that you can change... GS inconsistencies as usual... It is not even that the parameter does not exist, it is just that it is only available in the handle macro itself and is set to fixed values depending on the handle chosen...

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win11 | i9 10850K | 64GB | RX6600 Win10 | R5 2600 | 16GB | GTX1660
Bidaya
Contributor

Than you both for your replies

I will add the option to the wishlist....

Best regards.

Barry Kelly
Moderator

Do you not have 'Panic Bar' options for the handle types?

Is that what you are after?

 

BarryKelly_0-1649743157132.png

 

Or is this yet anther difference between INT and USA libraries?

 

Barry

 

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

Think they are wanting a vertical full height handle.

 

"...bars that have the height of the door..."

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win11 | i9 10850K | 64GB | RX6600 Win10 | R5 2600 | 16GB | GTX1660

I thought it might have been a typo - height/width.

 

But yes, if it is a vertical bar and Bidaya wants different sizes, then they will have to create a custom objects for each size.

The height position can be adjusted in the door settings, but not the length of a vertical handle.

 

Barry.

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

PM.jpg

This is what I am looking for.