This profile includes a dedicated Structural Engineering toolbar. These controls help you easily change the display of the structural analytical model view, as needed.
To become familiar with available display options and settings for the structural analytical model view, please see the details below.
Show/Hide Structural Analytical Model View
The structural analytical model can be displayed on the floor plan, section windows, and 3D views. Use the Structural Analytical Model toggle to display it.
The show/hide status of the structural analytical model view is specific to each view, such as floor plan, section windows or 3D views: if it is on in one view, it can be off in another view.
Structural Analytical Model Display Settings
Use the Structural Engineering toolbar controls to easily set the display options for the structural analytical model view.
The Transparent physical model button displays the physical model in a transparent form together with the structural analytical model, in the current view.
The Nodes button displays nodes at the ends/corners of the structural members in the current view.
By default, the nodes use the following colors to represent different connection statuses:
Green node Represents a correct connection point or intersection between joined analytical members.
Red node Represents a point or end that is either free (no connection needed), or unconnected/unsupported.
Use the End/Edge Releases button to display the structural members' release conditions in the current view. These symbols display end/edge conditions wherever they differ from the default one. (The default is the fully rigid end/edge).
Use the Profiles of Load-Bearing Cores button to display the cross-sections of all Beams and Columns in the structural analytical model. This option is available only for 1D members (Beams and Columns).
Use the Local Coordinate System button to display the element’s local coordinate system in the structural analytical model. This option is available in the 3D window only. By default, the coordinate system uses the following colors:
Local X - thick red line
Local Y - thin green line
Local Z - thin blue line
You can set transparency for all 2D members (Slab, Wall, Roof) and surface-type structural links. Use the Transparent 2D Members button to activate this display option.
Use the Transparent Symbols button to activate a transparent display for symbols such as nodes, end release, spring-type structural link, support symbols and profiles of load-bearing cores.
Structural Analytical Model Representation Settings