cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Collaboration with other software
About model and data exchange with 3rd party solutions: Revit, Solibri, dRofus, Bluebeam, structural analysis solutions, and IFC, BCF and DXF/DWG-based exchange, etc.

Forum Posts

Rough Opening Header Heights

I'm trying (very hard) to show the rough opening header height in my Door/Window Schedules. Seems there's no option for Header heights, only Sill heights. All the available schedule parameters will show the height of the unit, and not the rough openi...

Anonymous by Not applicable
  • 4237 Views
  • 4 replies
  • 0 likes

door not showing in plan

Does anyone know why a door (d&w builder) does not show up in plan, but does in elevation? Just a dot and the opening appear. This plan was started in windows on a pc, but I am now using a mac. The door appears in plan on the pc. This is strange. Eve...

Id in Door schedule

Hi! over there MARY CHRISTMAS I would like to put the id number in my door schedule. But I would like display the id numbers for the same door type in the same column Likes if I have three types of door I like to see in the Id column all the Id numbe...

Anonymous by Not applicable
  • 1926 Views
  • 1 replies
  • 0 likes

Publish to DWG?

It seems that in the past we did our layouts and put them in a publisher set and when we wanted to send to engineers to use as back grounds we changed the publication method to save and the file type to dwg. Then make sure the translator is set to ex...

Anonymous by Not applicable
  • 1653 Views
  • 1 replies
  • 0 likes

Hanger tool/add-on for MEP elements

Is there any addon available that will allow me to hang MEP elements either from the slab above and along vertical walls? It will be good if we would be able to specify the distance from the slab/wall, slope (of pipes) etc. Right now all these elemen...

Anonymous by Not applicable
  • 4562 Views
  • 5 replies
  • 0 likes