DXF-DWG Fills Mapping

Craig Boyer
Graphisoft Alumni
Graphisoft Alumni
Follow the steps below to map line types in ArchiCAD to those in a DXF/DWG file. For an overview on DXF/DWG translators, click here.

 

1. Select the translator you wish to edit.

2. In the Settings tab, navigate to the Save Options and make sure that a DXF/DWG template file is loaded. For information on how to do this, please click here.

 

wp-content_uploads_2016_06_Info_18x18.png
NOTE: A template file will allow you to select attributes from a pull down menu. If you don't have a template file to reference you will need to manually enter the mapping information.

 

wp-content_uploads_2018_11_Screen-Shot-2019-02-08-at-9.15.46-AM.png

3. In the Settings tab, navigate to the Attributes > Fills > Fill-hatch conversion and click New...

wp-content_uploads_2018_11_Screen-Shot-2019-02-08-at-12.24.32-PM.png

4. In the Edit the fill-hatch conversion item dialogue box, choose the ArchiCAD fill to map, choose the AutoCAD Hatch Pattern name and click OK.

wp-content_uploads_2018_11_Screen-Shot-2019-02-08-at-12.24.44-PM-300x238.png

5. Repeat for additional fills if necessary.

6. Click Save Settings & Close.

wp-content_uploads_2018_11_Screen-Shot-2019-02-08-at-12.24.48-PM-1.png

Still looking?

Browse more articles

Back to articles

See latest solutions

Accepted solutions

Start a new discussion!