BIM Coordinator Program (INT) April 22, 2024
Find the next step in your career as a Graphisoft Certified BIM Coordinator!
Modeling
About Archicad's design tools, element connections, modeling concepts, etc.
SOLVED!

Columns Showing on Non-Relevant Stories

Lingwisyer
Guru
Hi all,

I have a set of columns which are showing below the story they are on when set to show on "All Relevant Stories". Two stories below in the carpark is definitely not relevant...


Setting my FPCP to not show any above stories does not make any difference...



Ling.

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win11 | i9 10850K | 64GB | RX6600 Win10 | R5 2600 | 16GB | GTX1660
1 ACCEPTED SOLUTION

Accepted Solutions
Solution
Lingwisyer
Guru
Ah... That was obvious... The inverse of the issue I had with the stairs on the zero height story... Solved for now with a negative top Floor Plan Range.



Ling.

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win11 | i9 10850K | 64GB | RX6600 Win10 | R5 2600 | 16GB | GTX1660

View solution in original post

2 REPLIES 2
Barry Kelly
Moderator
What are the heights for the 2 storeys below ground floor?
I assume GF is at project zero.
Your columns are 100mm below project zero, so they will definitely show one storey down.

Barry.
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11
Solution
Lingwisyer
Guru
Ah... That was obvious... The inverse of the issue I had with the stairs on the zero height story... Solved for now with a negative top Floor Plan Range.



Ling.

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win11 | i9 10850K | 64GB | RX6600 Win10 | R5 2600 | 16GB | GTX1660
Learn and get certified!