Modeling
About Archicad's design tools, element connections, modeling concepts, etc.

Corner window on two walls with different thicknesses

bouhmidage
Advisor

Hello, 

i think it's a strange behaviour from Archicad as i remember i did this before correctly, 

Placing corner windows on 2 diffentent walls causes problems in the corner frame, it won't connect even when i check " different wall thickness " and i add the thickness 

 

Any soltion please ? 

 


1.png2.png
AMD Ryzen 9 3900X, 32 GB RAM, RTX 3080 10 GB
Archicad 25
Windows 10 professional
https://www.behance.net/Nuance-Architects
7 REPLIES 7

it seems to work for me in 25 as expected. 2021-10-29_12-55-17.png

 

try the other Corner ?  

SteveJepson_0-1635537591179.png

Also, both Window and Walls can be set to Projected instead of Symbolic - ?

 

SteveJepson_1-1635538899398.png

 

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25

Thanks steve for the reply,

It works for walls with the same thickness, but not with different wall thicknesses, Archicad 23

AMD Ryzen 9 3900X, 32 GB RAM, RTX 3080 10 GB
Archicad 25
Windows 10 professional
https://www.behance.net/Nuance-Architects

Like this -  but does not work with 23.  I got it.  

SteveJepson_0-1635541600723.png

 

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25

bouhmidage
Advisor

Does this was mentioned in the new features of Archicad 25?

AMD Ryzen 9 3900X, 32 GB RAM, RTX 3080 10 GB
Archicad 25
Windows 10 professional
https://www.behance.net/Nuance-Architects

It works for me in 23 as well.   

SteveJepson_0-1635544031502.png

 

It could be that his happens with a certain window type.

Something is not quite right. I have been able to generate the anomies a couple of times but I didn't notice it time to find what it was using Ctrl-z.   What window are you using ?

I was able to get it to look correct using some the Bring To Front tool and changed settings to Projected rather than Symbol.  I think it has more to do with getting things to rebuild than the settings changes ? 

SteveJepson_1-1635548574387.png

 

 

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25

bouhmidage
Advisor

I glt it,

It works only when reveal is set to 0, then, i should place my windows on the inner face, 

AMD Ryzen 9 3900X, 32 GB RAM, RTX 3080 10 GB
Archicad 25
Windows 10 professional
https://www.behance.net/Nuance-Architects
Lingwisyer
Guru